(410) 677-4975
Used - Roof replacement guide cover with a finished G and Bros shingle roof

What to Expect During a Roof Replacement: A Step-by-Step Guide for Salisbury, MD Homeowners

By : Guillermo Molina Matus

A roof replacement is one of the biggest projects a Salisbury homeowner takes on, and it can feel confusing from the outside. What happens the day the crew shows up? How long will the driveway be blocked? Will the noise drive the dog crazy for a week?

The good news: on a typical Eastern Shore home, a professional replacement usually takes one to two days. Here is every step, in order, so there are no surprises from the estimate to the final walkthrough.

The roof replacement process at a glance

1

Estimate and scope walk. Measurements, pitch, penetrations and a look at the decking.

2

Permit. Your contractor should know the local rules and pull the permit if one is required.

3

Material delivery. Shingles, underlayment and flashing arrive the day before or that morning.

4

Tear-off. The old roof comes off down to the decking.

5

Decking check and repairs. Soft or rotted boards get replaced before anything new goes on.

6

New roof system. Ice and water shield, underlayment, starter, shingles, flashing and ridge cap.

7

Cleanup and walkthrough. Debris and nails are cleared and you walk the job with your contractor.

Step 1: The Estimate and Scope Walk

Before anything is ordered, the contractor measures the roof, checks the pitch, counts the penetrations (chimneys, vents, skylights) and looks at the condition of the decking. This is when pre-existing problems get spotted and written into the plan.

Get the materials, labor and timeline in writing before you sign anything. At G and Bros, every estimate is itemized so you can see exactly what you are paying for.

Step 2: The Permit

Many Maryland and Delaware jurisdictions require a permit for a full roof replacement. Rules vary by county and town, so ask who pulls the permit before you sign. A roofer who tells you permits never matter is a red flag. Work done without a required permit can cause problems when you sell the house or file an insurance claim.

Step 3: Material Delivery

Shingles, underlayment, ice and water shield, ridge cap, flashing and nails usually arrive the day before the job or first thing that morning. Expect your driveway or the street in front of the house to be used for staging, and move your cars if you can.

Used - Shingle bundles staged on the roof over new synthetic underlayment during a G and Bros roof replacement in Nanticoke, Maryland

Shingles staged on the roof over new underlayment on a G and Bros replacement in Nanticoke, MD.

Step 4: Tear-Off

The crew strips the old roof down to the decking. This is the loudest and messiest part of the job. Old shingles, nails and underlayment come off and go straight into a dump trailer or a tarped area.

A good crew protects your landscaping with tarps and runs magnetic sweepers for nails. If you have a garden or a play area close to the house, mention it before the job starts.

Step 5: Decking Check and Repairs

With the old roof off, the crew checks the plywood or board decking underneath. Soft spots and rot are common on older Eastern Shore homes where humidity has worked its way in over the years. Damaged sections are replaced before anything new goes down.

This is the one place your final cost can change. A reputable contractor shows you the damaged boards and the price before replacing them. On our jobs, decking is priced per sheet in the contract, $65 per sheet of 1/2″ sheathing, so you know the number before the crew starts.

Used - New plywood roof decking installed before underlayment on a G and Bros roof replacement in Nanticoke, Maryland

New decking installed on a G and Bros job in Nanticoke, MD, before the underlayment goes down.

Step 6: The New Roof System

The new roof goes on in layers, from the bottom up:

  • Ice and water shield along the eaves, in the valleys and around penetrations. With winter ice possible and constant coastal moisture, this layer matters on the Eastern Shore.
  • Synthetic underlayment over the rest of the deck as a second moisture barrier.
  • Starter strip along the eaves, then shingles in rows from the bottom to the peak.
  • Flashing around chimneys, walls, vents and skylights.
  • Ridge cap to seal the peak and finish the roof.

G and Bros is GAF Certified Plus. When you choose a qualifying GAF roof system, we can register it for a GAF manufacturer warranty. Ask any contractor which warranties they can register before you hire them.

Used - G and Bros crew installing new architectural shingles over underlayment on a roof replacement in Nanticoke, Maryland

New shingles going on over underlayment on a G and Bros replacement in Nanticoke, MD.

Step 7: Cleanup and Final Walkthrough

Before the crew leaves, they clear the debris, run the magnetic sweepers again and check the flashing, ridge cap and gutters. Walk the outside of the house with your contractor before you sign off, and keep the paperwork, warranty details and any permit records with your home files.

What About the Gutters?

A replacement is a good time to look at your gutters. If they are more than about 15 years old, pulling away from the fascia or leaking at the seams, replacing them at the same time saves a separate trip later.

We replace roofs across Wicomico, Worcester and Somerset counties and in Sussex County, Delaware, including Selbyville and Millsboro. The process is the same everywhere, though permit rules differ by town and county.

Frequently Asked Questions

How long does a roof replacement take in Salisbury, MD?

Most single-family homes take one to two days. Bigger homes, complex roof shapes or extensive decking repairs can add time.

Do I need to be home during the replacement?

No, but stay reachable by phone. Plan to be there at the start for a quick walkthrough and at the end to look over the finished job.

What happens if it rains?

Crews watch the forecast closely. If rain moves in, the open sections are covered so water stays out, and work picks back up as soon as the weather allows.

Is a permit required?

Often, yes, for a full replacement, but the rules depend on where you live. Your contractor should know the local requirements and handle the permit if one is needed.

How do I know if my decking needs to be replaced?

A soft or spongy spot when walking the roof is the most common sign. The crew confirms it at tear-off, and a good contractor shows you the damage and the price before replacing anything.

Planning a new roof in Salisbury?

G and Bros is GAF Certified Plus, family-owned since 2012, with 25+ years of Maryland roofing experience from our founder. We handle roof replacements across Salisbury, the Eastern Shore and southern Delaware, with an itemized written estimate before any work starts.

Get a Roof Quoteor call 410-677-4975

Used - G and Bros Services Pictures. 109 Clark St Salisbury MD 21804 Local Roofing Contractor in the Salisbury Area. Commercial Roofing Company. Residential Roofing Company. Shingle Roof Repair Shingle Roof Replacement TPO Roof Repair TPO Roof Replacement EPDM Roof Repair EPDM Roof Replacement Metal Roof Repair Metal Roof Replacement
Share to...